🎉 Up to 70% Off Selected ItemsShop Sale
1 / 12
+7
Rennsteig 9R 400 012 12 Pc Punch and Chisel Set
General Information
Manufacturer
Rennsteig
Part Number
9R 400 012
Product Type
Punch and Chisel Set
California Residents
Proposition 65 Warning
Specifications
Color
Gold
Material
Chrome Vanadium Steel
Width
2"
Height
2"
Weight
1.18 kg
2.60 lb
Miscellaneous
Features
Where precision meets durability with every strike, the 9-Piece punch and chisel set is built to handle challenging tasks. This set includes three 8” cold chisels, two center punches, two tapered punches and 5 pin punches. Perfect set for any demanding job, these tools ensure reliable and quality performance.
The octagonal shape is easier to grip when striking with a hammer and also prevents the tool from rolling away when placed on a surface
The material core design prevents mushrooming of the striking head
Tools are tempered to a hardness of 54 to 58 HRC - not just at the tip but throughout the entire length of the tool
Compiles with DIN 7255 standard
Cold Chisels - 9R 360 202 KUS (3/8" x 8"), 9R 361 202 KUS (1/2" x 8) and 9R 362 202 KUS (9/16" x 8")
Chisel features a hand ground sharpened edge designed to cut and shear cold metal
Striking head is turned and chamfered
Center Punches - 9R 431 120 KUS (3/16" x 4 3/4"), 9R 434 150 KUS (15/64" x 6"), 9R 440 003 KUS (7/64" x 4 3/4") and 9R 440 006 KUS (15/64" x 6")
Pin Punches - 9R 453 101 KUS (3/32" x 6"), 9R 453 102 KUS (7/64" x 6"), 9R 453 103 KUS (11/64" x 6"), 9R 453 104 KUS (5/16" x 6") and 9R 453 105 KUS (25/64" x 6")
Center punches are used to create permanent marks or locations when disassembling engine parts
For exact marking of a drill point and guidance of the drill bit
RENNSTEIG is a member of the KNIPEX Group that specializes in the design and manufacturing of high quality tools
All edges are rounded to prevent damage to the workpiece
Pin punches are used to install and drive pins out of holes
The octagonal shape is easier to grip when striking with a hammer and also prevents the tool from rolling away when placed on a surface
The material core design prevents mushrooming of the striking head
Tools are tempered to a hardness of 54 to 58 HRC - not just at the tip but throughout the entire length of the tool
Compiles with DIN 7255 standard
Cold Chisels - 9R 360 202 KUS (3/8" x 8"), 9R 361 202 KUS (1/2" x 8) and 9R 362 202 KUS (9/16" x 8")
Chisel features a hand ground sharpened edge designed to cut and shear cold metal
Striking head is turned and chamfered
Center Punches - 9R 431 120 KUS (3/16" x 4 3/4"), 9R 434 150 KUS (15/64" x 6"), 9R 440 003 KUS (7/64" x 4 3/4") and 9R 440 006 KUS (15/64" x 6")
Pin Punches - 9R 453 101 KUS (3/32" x 6"), 9R 453 102 KUS (7/64" x 6"), 9R 453 103 KUS (11/64" x 6"), 9R 453 104 KUS (5/16" x 6") and 9R 453 105 KUS (25/64" x 6")
Center punches are used to create permanent marks or locations when disassembling engine parts
For exact marking of a drill point and guidance of the drill bit
RENNSTEIG is a member of the KNIPEX Group that specializes in the design and manufacturing of high quality tools
All edges are rounded to prevent damage to the workpiece
Pin punches are used to install and drive pins out of holes
Country of Origin
Germany
General Information
Manufacturer
Rennsteig
Part Number
9R 400 012
Product Type
Punch and Chisel Set
California Residents
Proposition 65 Warning
Specifications
Color
Gold
Material
Chrome Vanadium Steel
Width
2"
Height
2"
Weight
1.18 kg
2.60 lb
Miscellaneous
Features
Where precision meets durability with every strike, the 9-Piece punch and chisel set is built to handle challenging tasks. This set includes three 8” cold chisels, two center punches, two tapered punches and 5 pin punches. Perfect set for any demanding job, these tools ensure reliable and quality performance.
The octagonal shape is easier to grip when striking with a hammer and also prevents the tool from rolling away when placed on a surface
The material core design prevents mushrooming of the striking head
Tools are tempered to a hardness of 54 to 58 HRC - not just at the tip but throughout the entire length of the tool
Compiles with DIN 7255 standard
Cold Chisels - 9R 360 202 KUS (3/8" x 8"), 9R 361 202 KUS (1/2" x 8) and 9R 362 202 KUS (9/16" x 8")
Chisel features a hand ground sharpened edge designed to cut and shear cold metal
Striking head is turned and chamfered
Center Punches - 9R 431 120 KUS (3/16" x 4 3/4"), 9R 434 150 KUS (15/64" x 6"), 9R 440 003 KUS (7/64" x 4 3/4") and 9R 440 006 KUS (15/64" x 6")
Pin Punches - 9R 453 101 KUS (3/32" x 6"), 9R 453 102 KUS (7/64" x 6"), 9R 453 103 KUS (11/64" x 6"), 9R 453 104 KUS (5/16" x 6") and 9R 453 105 KUS (25/64" x 6")
Center punches are used to create permanent marks or locations when disassembling engine parts
For exact marking of a drill point and guidance of the drill bit
RENNSTEIG is a member of the KNIPEX Group that specializes in the design and manufacturing of high quality tools
All edges are rounded to prevent damage to the workpiece
Pin punches are used to install and drive pins out of holes
The octagonal shape is easier to grip when striking with a hammer and also prevents the tool from rolling away when placed on a surface
The material core design prevents mushrooming of the striking head
Tools are tempered to a hardness of 54 to 58 HRC - not just at the tip but throughout the entire length of the tool
Compiles with DIN 7255 standard
Cold Chisels - 9R 360 202 KUS (3/8" x 8"), 9R 361 202 KUS (1/2" x 8) and 9R 362 202 KUS (9/16" x 8")
Chisel features a hand ground sharpened edge designed to cut and shear cold metal
Striking head is turned and chamfered
Center Punches - 9R 431 120 KUS (3/16" x 4 3/4"), 9R 434 150 KUS (15/64" x 6"), 9R 440 003 KUS (7/64" x 4 3/4") and 9R 440 006 KUS (15/64" x 6")
Pin Punches - 9R 453 101 KUS (3/32" x 6"), 9R 453 102 KUS (7/64" x 6"), 9R 453 103 KUS (11/64" x 6"), 9R 453 104 KUS (5/16" x 6") and 9R 453 105 KUS (25/64" x 6")
Center punches are used to create permanent marks or locations when disassembling engine parts
For exact marking of a drill point and guidance of the drill bit
RENNSTEIG is a member of the KNIPEX Group that specializes in the design and manufacturing of high quality tools
All edges are rounded to prevent damage to the workpiece
Pin punches are used to install and drive pins out of holes
Country of Origin
Germany
$56.32
Original: $160.92
-65%Rennsteig 9R 400 012 12 Pc Punch and Chisel Set—
$160.92
$56.32Description
General Information
Manufacturer
Rennsteig
Part Number
9R 400 012
Product Type
Punch and Chisel Set
California Residents
Proposition 65 Warning
Specifications
Color
Gold
Material
Chrome Vanadium Steel
Width
2"
Height
2"
Weight
1.18 kg
2.60 lb
Miscellaneous
Features
Where precision meets durability with every strike, the 9-Piece punch and chisel set is built to handle challenging tasks. This set includes three 8” cold chisels, two center punches, two tapered punches and 5 pin punches. Perfect set for any demanding job, these tools ensure reliable and quality performance.
The octagonal shape is easier to grip when striking with a hammer and also prevents the tool from rolling away when placed on a surface
The material core design prevents mushrooming of the striking head
Tools are tempered to a hardness of 54 to 58 HRC - not just at the tip but throughout the entire length of the tool
Compiles with DIN 7255 standard
Cold Chisels - 9R 360 202 KUS (3/8" x 8"), 9R 361 202 KUS (1/2" x 8) and 9R 362 202 KUS (9/16" x 8")
Chisel features a hand ground sharpened edge designed to cut and shear cold metal
Striking head is turned and chamfered
Center Punches - 9R 431 120 KUS (3/16" x 4 3/4"), 9R 434 150 KUS (15/64" x 6"), 9R 440 003 KUS (7/64" x 4 3/4") and 9R 440 006 KUS (15/64" x 6")
Pin Punches - 9R 453 101 KUS (3/32" x 6"), 9R 453 102 KUS (7/64" x 6"), 9R 453 103 KUS (11/64" x 6"), 9R 453 104 KUS (5/16" x 6") and 9R 453 105 KUS (25/64" x 6")
Center punches are used to create permanent marks or locations when disassembling engine parts
For exact marking of a drill point and guidance of the drill bit
RENNSTEIG is a member of the KNIPEX Group that specializes in the design and manufacturing of high quality tools
All edges are rounded to prevent damage to the workpiece
Pin punches are used to install and drive pins out of holes
The octagonal shape is easier to grip when striking with a hammer and also prevents the tool from rolling away when placed on a surface
The material core design prevents mushrooming of the striking head
Tools are tempered to a hardness of 54 to 58 HRC - not just at the tip but throughout the entire length of the tool
Compiles with DIN 7255 standard
Cold Chisels - 9R 360 202 KUS (3/8" x 8"), 9R 361 202 KUS (1/2" x 8) and 9R 362 202 KUS (9/16" x 8")
Chisel features a hand ground sharpened edge designed to cut and shear cold metal
Striking head is turned and chamfered
Center Punches - 9R 431 120 KUS (3/16" x 4 3/4"), 9R 434 150 KUS (15/64" x 6"), 9R 440 003 KUS (7/64" x 4 3/4") and 9R 440 006 KUS (15/64" x 6")
Pin Punches - 9R 453 101 KUS (3/32" x 6"), 9R 453 102 KUS (7/64" x 6"), 9R 453 103 KUS (11/64" x 6"), 9R 453 104 KUS (5/16" x 6") and 9R 453 105 KUS (25/64" x 6")
Center punches are used to create permanent marks or locations when disassembling engine parts
For exact marking of a drill point and guidance of the drill bit
RENNSTEIG is a member of the KNIPEX Group that specializes in the design and manufacturing of high quality tools
All edges are rounded to prevent damage to the workpiece
Pin punches are used to install and drive pins out of holes
Country of Origin
Germany
